Subject | Text |
How to repair HP 945 Photosmart | Hi,
I just repaired my HP 945 successfully.
The problem was, that after it crashed on the ground |
Aiwa NSX-D55 | Aiwa NSX-D55
Would it possible to send the service manual? Mine just suddenly stopped outputting m |
|
| It sounds like a crook solder joint in the verticle section of the circuit board. Not too hard to fi |
| there are different types of skipping. does it stay in one place and stutter, does it jump back, or |
Update to Sony KV35V76 on / off Picture | The KV35V76 is part of the KV32V36/32V36/34V36C and KV35V35/37V36M family
When the picture disapp |
Sony PCG-R505TE Laptop Service Manual | Hey Guys! I am working on a PCG-R505TE laptop and can't seem to figure out how to get access to the |
| Ok, here is an update
Spoke to Tiny £1 per min told me to do a factory reset on the plasma,
|
Re: Interlude IL60 | [quote:3742205c32="MiniZorg"][quote:3742205c32="TrevorPearman"]In case anybody cares
Fixed my Int |
Panasonic | Since you don't gave a model number, it is hard to be specific but you are probably correct in suspe |
| A bit hard to say without going into the actual troubleshooting...
Worst case: your picture tube |
guys help me with this one... urgently needed a reply... | can someone help me with this one...
heres the problem:
my pc hangs when i insert usb devices such |
| Error 808: A fuser error occured in the drive circuit.
There are a whole slew of things that can |
| Sounds like your missing the blue component - is this the three connection type component video sign |
Zenith - convergence problem | I have a zenith projection tv model icq50hb94w. The other day i removed the video input cables at th |
| Yeah ive tried that to, as well as using brand new cables, its something within the player itself |
| Hi jchunter,
Sorry, I haven't got service manual or schematic diagram for the Grundig VCR4000AV. |
| There are two causes for this failure:
1) Faulty tube, but most of the times two colors won't dis |
|
| HI, why don't you buy a cheap tuner & use it as the referance & error feed bck. then all you |
Re: denon udm3 | [quote:9288a09cb3="guest"]Yep - I have exactly the same problem. CD tray won't eject. No motors
ru |
Sony Amp - The woes continue | Andreas,
Try removing every input and output and see what happens, then add them back one by one |
| Turn your T.V. off. That thin bright line is a full screens worth of brightness in a very small area |
Re: TechLine 37" LCD TV green color instead black | [quote:88fcda1491="pecello"]>Sounds like a cable unplugged or a bad T-con board.
Cables are OK |
| This is turning more into a blog :-) Anwyay, I'm thinking of replacing the diode with a generic UF40 |
conv 9-1690 | Just fixed one of those 1690..service notes state replace ic s .. I would check r4151 1k off pin |
| how hard is that to do yourself? or how much does it cost to have done?
thanks |
canon mv3 | Hi looking for internal drive mechenism diagrams for the canon mv3 mini dv camcorder.Any help is ver |
| i think you have problem with your graphics card. restart your computer and then before starting to |
Replacing busted DVD Player with a PC IDE, DVD ROM? | Hi all,
Does anyone have experience with replacing a bad DVD loader in a DVD player with an inexpe |
| come now u got to be kidding right iv put up and taken down more than my shere of plasmazs alone ok |
| Hi,
Have u checked the connection cables between the laser pickup & the main PCB? There could |